DIY Custom Headboards

Custom Headboards Ideas for Boys

Cool Fabric Headboard Ideas

Quilt Fabric Headboard Ideas

April 17, 2017 Headboard Ideas

Making Twin Upholstered Headboard

Twin upholstered headboard is a simple way to give a bedroom a do it yourself touch. Twin beds are especially suited for this project because the smaller dimensions make it easier to hold the fabric smooth and lighter weight board is easier to hang from the wall. Since you only need one and a half of cloth for a twin upholstered headboard yard and consider splurging on something special.

Twin Upholstered Headboard Blue

Twin Upholstered Headboard Blue

Instructions

13 Inspiration Gallery from Making Twin Upholstered Headboard

Image of: Best Twin Upholstered Headboard
Image of: Best Twin Upholstered Headboard
Image of: Twin Upholstered Headboard White
Image of: Twin Upholstered Headboard Review
Image of: Twin Upholstered Headboard Pink
Image of: Twin Upholstered Headboard Orange
Image of: Twin Upholstered Headboard Image
Image of: Twin Upholstered Headboard Grey
Image of: Twin Upholstered Headboard Girly
Image of: Twin Upholstered Headboard Fabric
Image of: Twin Upholstered Headboard Design
Image of: Twin Upholstered Headboard Cream
Image of: Twin Upholstered Headboard Blue
 

Cut the plywood to the width of your mattress and four meters in height. A twin size mattress is 39 inches wide. The board can be left rectangular, or the corners can be rounded. Use a plate of a model for a rounded corner; hold it against the two top corners and tracking around the curve.

Lay the batting on the floor with plywood in the middle of it. Pull the ends around to the back of the card and staple them in place 2 inches from the board edges. Miter the corners by folding down the upper and lower first and then the sides, and then pull the remaining corner material down and staple it in place.

Place the fabric on the floor face down. Place the board on the fabric, batting down. Pull the fabric around to the back of the card and staple it in place 2 inches from the edge of the board. Gera corners as above. The fabric to be pulled taut and smooth such that there are no wrinkles in the front twin upholstered headboard. Trim the edges of the batting and fabric to a half inch from the staples. Attach the padded board on the wall with flush mounts.

Comments are closed.